Mes: junio 2019

LECA production process features

The raw material for LECA production is mainly sedimentary clay materials, less frequently – metamorphic rocks (argillite, clay slate and other stone-like materials).

Their composition is complex and they include both clay minerals (hydrous micas, kaolinite, etc.) and field spar, quartz, carbonates, organic and iron admixtures.

So what is the raw material for production of this construction material? Clays containing no more than 30% of quartz are the best material for production of LECA.

Special research is conducted to determine if a particular material is suitable for production. The main requirements for the raw materials:

1. ability to swell up during baking;

2. high fusibility;

3. a specific swinging-up interval.

Sometimes special additives are introduced into raw materials to increase the winding-up coefficient. Organic (diesel fuel, fuel oil residue, etc.), ferruginous substances, geological materials (perlite, alunite) or artificial substances can be used as additives.

The product of the raw material processing is raw granules of a specific size and composition. Such granules are subjected to heat treatment: they are dried, baked and cooled. At the net stage the produced material is sorted in terms of density, and is chipped into smaller particles. After sorting LECA is ready for storage or shipment to the point of use.

The main LECA production stages:

• delivery of the raw material;

• clay drying;

• raw material cooling;

• cooling of granules;

• fractionation;

• transportation and storage.

Methods of LECA granule production

There are four main LECA production methods which are different in terms of their technology:

1. dry;

2. wet;

3. powder and plastic;

4. Plastic.

The choice of a particular method depends on the raw material quality.

Dry LECA production method

This is the simplest method. It is used for stone-like raw material. First it is chipped and then charged into the rotary furnace. Such a method is most efficient if the rock is uniform, without harmful inclusions. It is characterized by modest costs and low power consumption.

The process flow diagram of a typical LECA gravel production shop with the capacity of 100 thous. m3 per year consists of three rooms:

• preparatory forming room;

• furnace room;

• finished product storage area

The process consists of the following stages:

• feeding, preparation and forming of the raw material;

• clay drying;

• clay baking;

• LECA cooling;

• feeding of the finished product to the storage area.

LECA granule cooling

After baking LECA should be cooled. The cooling begins back in the rotary furnace due to the incoming air. Then it continues on airslide conveyors and in drum coolers, etc.

The material strength depends on the granule cooling rate. If cooling was too fast, granules may crack. In case of slow cooling the material quality may decrease as a result of softening and crumpling of granules.

That is why LECA is cooled to 800 to 900 degrees immediately after swelling up. Then it is cooled to 600 to 700 degrees for 20 minutes.

This is required so that the hardening procedures without significant thermal stress and that crystal minerals form, which increase the strength properties of the material. Further cooling may be performed reliably quickly.

LECA fractionation and transport

Fractionation is performed using drum screens of a cylindrical or multifaceted shape.

LECA is transported within the plant using compressed air or a belt conveyor. The conveyor method is more popular as transportation via pipes using air flow results in damage of the sheath and crushing of granules.

The finished material is stored in silo- or bin-type storage. Before storage LECA is preliminarily packaged into special moisture-proof sacks of varying volume.

LECA production equipment

The LECA production line consists of:

• ripping devices;

• perforated rollers;

• clay mixer;

• drying drums;

• baking furnace;

• bins;

• air-slide conveyors;

• belt- or other types of conveyors;

• trays;

• gravel Søters, etc.

A spacial crusher is used for primary processing of the raw material. It consist of a chipping unit which enterprises such components as

1. bladed counterrotating shafts;

2. rigid frame;

3. gear drive;

4. receiving bin.

When the shafts start to rotate, the raw material is chipped to the necessary size. A mixer is used for the inclusion of necessary additives.

Control de obras 3000 de Cea Ordenadores

Companies that offer a professional offsite backup service are serious about looking after your data. Many of these companies have people that have experience in military level security and extremely high levels of technology. These technologies and techniques are surprisingly advanced, and understand that may mean more than gadgets. From the concrete that the building is made of, through to the types of steels used, and temperature control materials, are all a part.

Let's take a look at some of the measures that these companies take with the safe storage of your data. It is important to note that many of them will never release full information on what they do, even to clients, and disclosure of any information by any existing or previous client, would be a serious breach of their agreements.

• Location. There are many factors considered for the location of a facility. Region, laws and climate will play a significant role in decision making. Away from the prying eyes of public and often in remote locations that allow for a large amount of surveillance around the facility.
• Underground. Underground military bunkers are the perfect locations for these facilities as underground locations offer a range of added security features.
• Construction. Materials used in the construction of these facilities is typically much more than the norm. Super thick walls made of special materials and techniques that even take a bomb blast are what you can expect. The latest technologies in construction keeping that construction are used.
• High tech. Entering a facility can feel like entering something out of a James Bond movie, with super high technologies. Motion, temperature, light and sound are all monitored. Retina and finger print technologies are commonly used for security beyond the regular smart cards.
• Compartmentalisation. This an another essential security feature, as individual data will be stored separately in different sectors. Data on how this is managed and even plans of the facility will also be protected.
• Personnel. Staff with the experience, background, knowledge and what are fully checked and conversant with required procedures make up a critical part of any facility. Effective fail safe measures and total system cross checking are essential. No one person can do anything.
• Power. Naturally sufficient, any one of these facilities can maintain all levels of security without reliance on external services for extended periods of time is critical. Self managed generators that can supply the facility for extended time frames is normally the case.
• IT security. Keeping the facility functioning also allows it to maintain its own security. Remember that your data can probably only access in a physical or online sense by choice. Many companies take the measure to store large amounts of important data completely offline for super offsite data storage security.

Checking the facility of your potential supplier is probably an option although you will be subject to very serious non-disclosure agreements and you will certainly not allow to complete understanding of all of the features they use.

Control de obras 3000 de Cea Ordenadores